BASF
manufacturer
Ingredient reference
1310-73-2FormulaNaOH
Strong alkali for pH adjustment, neutralization, and process pH control.
| INCI Name | Sodium Hydroxide |
|---|---|
| CAS Number | 1310-73-2 |
| Molecular Formula | NaOH |
| Ionic Type | Ionic |
| Abbreviations | NaOH |
Sodium Hydroxide is an industrial ingredient used for strong alkali for ph adjustment, neutralization, and process control. in selected chemical formulation systems.
Sodium Hydroxide is used in practical industrial formulations where strong alkali for ph adjustment, neutralization, and process control. are required. Grade selection should consider active matter or assay, impurity profile, physical form, pH range, compatibility, processing conditions, and supplier documentation. Typical values are screening guidance only and should not replace supplier specifications.
Commercial specifications vary by grade, impurity profile, concentration, physical form, and supplier documentation.
| Property | Value | Unit | Source / Method |
|---|---|---|---|
| Appearance | White solid or clear aqueous solution | N/A | Typical industrial range; verify supplier specification. |
| Assay | 25 - 99 | % | Typical industrial range; verify supplier specification. |
| pH | 12 - 14 | N/A | Typical industrial range; verify supplier specification. |
| Solubility Water | Highly water soluble | N/A | Typical industrial range; verify supplier specification. |
| Molecular Weight | 40 - 40 | g/mol | Typical industrial range; verify supplier specification. |
| Density | Solution density depends on concentration | N/A | Typical industrial range; verify supplier specification. |
status: compatible | Dissolution and dilution can generate heat; add with appropriate controls.
status: limited | Neutralization is exothermic and must be controlled.
status: avoid | Can react with some metals; verify compatibility before use.
manufacturer
manufacturer
Review and verify the supplier SDS/TDS before handling, scale-up, or commercial use. Sodium hydroxide is corrosive and dilution is exothermic; use appropriate PPE and controlled addition procedures.
Use must be assessed by product category, exposure route, impurity profile, and local requirements. Confirm current status from supplier documentation before market launch.